inconel 625 alloy

inconel 625 alloy

[PDF]

INCONEL alloy 625 - Special Metals Corporation

INCONEL alloy 625 are shown in Table 5. For service at 1200°F and below, hot-finished, cold-finished, and annealed conditions (depending on requirements involved) are recom-mended. For service above 1200°F, either annealed or solution-treated material will give best service.

Inconel 625 - Nickel Alloy 625 (UNS N06625) | Altemp ...

altempalloys› Nickel Based AlloysAlloy 625 is a nickel-chromium alloy known and used for corrosion and oxidation resistant, high strength and fabricability. Because of its resistance to corrosion, pressure and heat, Inconel 625 is ideal for applications in the power industry, aerospace, and chemical processing components and hardware and marine industries.

INCONEL 625 UNS N06625 - HPALLOY

Inconel 625 is a material with excellent resistance to pitting, crevice and corrosion cracking. Inconel 625 is highly resistant in a wide range of organic and mineral acids. Good high temperature strength.

Inconel 625 - Wikipedia

Inconel 625 was designed as a solid solution strengthened material with no significant microstructure. This holds true at low and high temperatures, but there is a region (923 to 1148 K) where precipitates form that are detrimental to the creep properties, and thus the strength, of the alloy.Chemistry·

inconel 625 - China Phoenix Alloy

Alloy 625 has a high level of pitting and crevice corrosion resistance to chloride contaminated media, such as sea water, neutral salts and brines. Alloy 625 is used in chemical processing, aerospace and marine engineering oil & gas, pollution control equipment and nuclear reactors. Specification

625 - Rolled Alloys, Inc.

Inconel 625 is a nickel-base alloy used both for its high strength and outstanding aqueous corrosion resistance. The strength of alloy 625 is primarily a solid solution effect from molybdenum and columbium.

Inconel® 625 - Alloy Wire International

A Nickel-Chromium-Molybdenum alloy with excellent corrosion resistance in a wide range of corrosive media, being especially resistant to pitting and crevice corrosion. It is a favourable choice for sea water applications. Inconel® 625 is also known as Nicrofer 6020, Superimphy 625, Chronin 625, Haynes 625, Pyromet 625, Supermet 625 and Udimet 625.

Inconel - Wikipedia

Inconel’s high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy. Inconel alloys are typically used in high temperature applications. Common trade names for Inconel Alloy 625 include: Inconel 625, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625 and Nicrofer 6020.History·

Inconel 625 Forgings - Inconel 625 High Temp Alloy | All ...

Inconel 625 Alloy & Forgings General Characteristics of Inconel 625 Alloy. Inconel 625 is a corrosion and oxidation-resistant nickel-base alloy. It has outstanding strength and toughness in the temperature range cryogenic to 2000ºF (1090ºC) thanks to the solid solution effects of columbium and molybdenum in a nickel-chromium matrix.

Inconel Forging - Inconel Alloy Properties and Applications

Inconel 625 differs from many of the other Inconel alloys because its composition includes substantial amounts of nickel, chromium, and molybdenum. It also has an addition of niobium. The result is an alloy that possesses high levels of strength without ever having to go through a strengthening heat treatment.

Inconel 625 Tech Data - High Temp Metals

Description

Inconel® Fasteners - Inconel® 625 & 718 Bolts | The Dale ...

Inconel®, a nickel-chromium-molybdenum alloy, exhibits high strength, toughness, and good corrosion resistance in temperatures from cryogenic to 2200°F. It is available in a range of grades, offering different strength and corrosion resistance. The most common grades used for bolts and fasteners are Inconel® 625 and Inconel® 718.

Inconel® 625 - Alloy Wire International

A Nickel-Chromium-Molybdenum alloy with excellent corrosion resistance in a wide range of corrosive media, being especially resistant to pitting and crevice corrosion. It is a favourable choice for sea water applications. Inconel® 625 is also known as Nicrofer 6020, Superimphy 625, Chronin 625, Haynes 625, Pyromet 625, Supermet 625 and Udimet 625.

Inconel® 625 Nickel Alloy - combmet

Inconel 625 Alloy Inconel 625 is a specially-formulated family of alloys designed for use in environments where there are extremely high temperatures. At 2,000°F, Inconel 625 has a tensile strength of 13.3 KSI (13,300 psi).

Inconel 625 - bdalloy

bdalloy› Alloys› Inconel AlloysInconel 625 has good oxidation resistance at temperatures up to 980℃ and shows good resistance to aqueous corrosion, but Inconel 625 is relatively moderate compared with other corrosion resistant alloys. Applications: Chemical process industry and sea water application. Inconel 625 is used in short term applications at temperatures up to 816℃.

Inconel 625 Alloy - Wire | Elgiloy Specialty Metals

Inconel ® 625 is a Nickel-Chromium-Molybdenum-Columbium (Niobium) alloy with excellent oxidation resistance, corrosion resistance, and strength at high temperatures. Age-hardening treatments are not required to obtain the high strength properties of Inconel ® 625 due to the solid solution effects of molybdenum and columbium on the nickel ...[PDF]

HAYNES 625 alloy

HAYNES® 625 alloy (UNS N06625) is a nickel- chromium-molybdenum alloy with excellent strength from room temperature up to about 1500°F (816°C). At higher temperatures, its strength is generally lower than that of other solid-solution strengthened alloys. Alloy 625

Inconel 625, UNS N06625, Alloy 625 - MEGA MEX

Inconel 625 is a corrosion and oxidation resistant nickel alloy that is used both for its high strength and outstanding aqueous corrosion resistance. Its outstanding strength and toughness is due to the addition of niobium which acts with the molybdenum to stiffen the alloy’s matrix.

Inconel® 625 (Alloy 625) UNS N06625 | Ulbrich

The alloy has excellent fatigue strength and stress corrosion cracking to chloride ions. Learn more here about its applications and properties. lnconel® 625 is a non-magnetic, corrosion and oxidation resistant, nickel-chromium alloy.

inconel alloy 625 bar - natural-elements-online

625 - Rolled Alloys, Inc. Inconel 625 is a nickel-base alloy used both for its high strength and outstanding aqueous corrosion resistance. The strength of alloy 625 is primarily a solid solution effect from molybdenum and columbium.

Nickel Alloy 625, Inconel® 625 - Continental Steel & Tube ...

Alloy 625 is a popular nickel-chromium alloy that offers users a high level of strength and ease of fabrication. Also sold by Continental Steel as Inconel® 625, alloy 625 is known for a number of different unique properties including:

Inconel 625 Plate - Triton Alloys Inc

Triton Alloys Inc. is a Inconel 625 Plate stockholders and suppliers, delivering to the whole of the world.we are ISO 9001:2008 accredited and supplies Inconel 625 Plate to internationally approved quality standards for applications. Inconel 625 Plate have excellent quality to …

Inconel 625 Alloy - Special steel china supplier-OTAI ...

Inconel 625 (NO6625) superalloy and process performance requirements. 1, Inconel625 formability: Alloy hot and cold forming good performance. Forging steel ingot heating temperature is 1120 ℃, open forging temperature not lower than 1030 ℃, stop forging temperature not lower than 930 ℃; when forging, the final amount of deformation of not less than 15% to 20%.

Inconel Alloy Manufacturers & Suppliers - China Inconel ...

Inconel Alloy Manufacturers, Factory, Suppliers From China, We never stop improving our technique and quality to keep up with the development trend of this industry and meet your satisfaction well. If you are interested in our products, please contact us freely.

inconel 625 supplier, inconel 625 price in india, alloy ...

Inconel 625 supplier, Buy Inconel 625 material, Inconel 625 Products, Check Inconel 625 price in India, Alloy 625 material stockist in India. Check Inconel 625 chemical composition, Inconel 625 weight calculator, Inconel 625 melting point, Inconel 625 heat treatment[PDF]

ALLOY 625 DATA SHEET - Jacquet Metal Service

ALLOY 625 DATA SHEET UNS N06625 //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions, including aerospace and chemical process applications. The alloy has outstanding strength and toughness at temperatures

Get In Touch24/7 Support

ADD : XICHENG SCIENCE & TECHNOLOGY BUILDING HIGH-TECH DEVELOPMENT ZONE, ZHENGZHOU, CHINA

TEL : 0086-371-86151827

FAX : 0086-371-86011881