high yield temper steel

high yield temper steel

301 Stainless Steel Strip High Yield Coil | 270,000 PSI ...

301 High Yield, ASTMA-666, is issued for special applications requiring extra high strength and hardness. This extra high strength material has a minimum tensile strength of 270,000 PSI.

Tempering (metallurgy) - Wikipedia

Steel with a high carbon-content will reach a much harder state than steel with a low carbon-content. Likewise, tempering high-carbon steel to a certain temperature will produce steel that is considerably harder than low-carbon steel that is tempered at the same temperature. The amount of time held at the tempering temperature also has an effect.

s690ql material properties - natural-elements-online

High Yield Structural Steel Plates - Conquest Steel and Alloys The material is heats treated using the quench and temper process and has good bending and welding properties. - The code "S" for steel grade S690QL means structural steel.

Alloys Properties - Stainless Steel ... - Tube Methods, Inc.

Our most commonly requested alloys, their chemical compositions, and typical applications. Specializing in Stainless Steel and High Temperature alloys. Our most commonly requested alloys, their chemical compositions, and typical applications. ... Temper Tensile Strength KSI Yield Strength KSI Minimum Elongation in 2" (%) Rockwell Hardness* 304 ...

4140 High Tensile Steel | Interlloy | Engineering Steels ...

4140 is a 1% chromium - molybdenum medium hardenability general purpose high tensile steel - generally supplied hardened and tempered in the tensile range of 850 - 1000 Mpa (condition T).4140 is now available with improved machinability, which greatly increases feeds and/or speeds, while also extending tool life without adversley affecting mechanical properties.[PDF]

HIGH-TEMPERATURE CHARACTERISTICS OF STAINLESS …

HIGH-TEMPERATURE CHARACTERISTICS OF STAINLESS STEELS NiDI Distributed by NICKEL DEVELOPMENT INSTITUTE Produced by AMERICAN IRON AND STEEL INSTITUTE . 3 The information and data presented in this booklet are typical or average values and are not a guarantee of maximum or minimum values. ... so the yield point as determined by the

0.0020 301 High Yield Stainless Steel Strip - gibbswire

301 High Yield, ASTMA-666, issued for special applications requiring extra high strength and hardness. This extra high strength material has a minimum tensile strength of 270,000 PSI. Gibbs stocks 301 High Yield Strip in gauges from 0.002" to 0.032" precision slit to widths from 0.022".

Ultimate tensile strength - Wikipedia

Ultimate tensile strength (UTS), often shortened to tensile strength (TS), ultimate strength, or Ftu within equations, is the capacity of a material or structure to withstand loads tending to elongate, as opposed to compressive strength, which withstands loads tending to reduce size.Concept·

Strengthening Mechanisms of Creep Resistant Tempered ...

In the steel tempered at high temperature, enhanced recovery of the subgrain structure along grain boundaries is the cause of the premature failure and the consequent loss of rupture strength. However, the scenario is not always applicable. Further studies are needed to …

Tempered Spring Steel Suppliers | Mead Metals in Minnesota

Spring steel is a low alloy, medium carbon steel or high carbon steel with very high yield strength. This allows objects made of spring steel to return to their original shape despite significant bending or twisting. Mead Metals Inc. offers tempered spring steel in multiple grades, …

yield and tensile strength of t1 ... - cadillac-steel

ASTM A514 steel is a quenched and tempered alloy steel used in applications that require a particularly high yield strength. A514 has a minimum yield strength of 100 ksi (690 MPa). Grades B, S and E are by far the most common, however, we have other grades available.[PDF]

4340 High tensile steel - ssm.co.nz

Nickel, Chromium, Molybdenum steel for applications requiring high tensile strength and toughness values, particularly in large cross sections in the quenched and tempered condition. The addition of Molybdenum prevents the steel from being susceptible to temper brittleness. Higher tensile and yield strength than 4140. APPLICATIONS

SSINA: Stainless Steel: Composition/Properties

high temperature properties Stainless steels have good strength and good resistance to corrosion and oxidation at elevated temperatures. Stainless steels are used at temperatures up to 1700° F for 304 and 316 and up to 2000 F for the high temperature stainless grade 309(S) and up to 2100° F for 310(S).

What Is the Metallurgical Term Known as Tempering?

Metal workers may be instructed to temper steel until it becomes a certain color. While steel used for axes is tempered until it becomes purple, the steel used for woodturning tools is tempered until it becomes brown, and steel used for lathe tools for brass is tempered until it becomes pale yellow.

SSINA: Stainless Steel: Composition/Properties

high temperature properties Stainless steels have good strength and good resistance to corrosion and oxidation at elevated temperatures. Stainless steels are used at temperatures up to 1700° F for 304 and 316 and up to 2000 F for the high temperature stainless grade 309(S) and up to 2100° F for 310(S).

What Is the Metallurgical Term Known as Tempering?

Metal workers may be instructed to temper steel until it becomes a certain color. While steel used for axes is tempered until it becomes purple, the steel used for woodturning tools is tempered until it becomes brown, and steel used for lathe tools for brass is tempered until it becomes pale yellow.

EN 10025-6 S690QL high yield structural steels Plates ...

Our S690Ql is a structural steel grade and is produced to give high yield strength during usage. The material can be heat treated using quench and temper techniques. These EN 10025-6 Plates have good forming and welding properties.[PDF]

4140HW Alloy Steel Technical Data - High-Performance …

TimkenSteel’s 4140HW grade is a fine-grained, low-alloy steel that offers optimum heat-treat response in heavier cross-sections. You find 4140HW in a variety of bar and tubing applications in quenched and tempered conditions. Yield strengths range from 110 ksi through 140 ksi, but we can temper …

High Strength Low Alloy Steel - imoa.info

The yield strength of contemporary HSLA steels ranges from 260 MPa to over 1000 MPa. Typically, Mo is used in HSLA steel when the yield strength must be above 550 MPa, or …[PDF]

Steel for packaging Product catalogue

The yield stress of steel grades ranges from 200 MPa to 750 MPa. The ... the most popular nowadays for its highly homogeneous properties and high yield strength. BA is still preferred for low tempers and its very low ageing ... The temper mill looks like a cold rolling mill (with only one or two stands). ...

Standard Materials | Smalley

Tensile strength and yield strength are maximized as a result of the oil tempered martensitic structure. HARD DRAWN. SAE 1060-1075 high carbon cold drawn spring steel is a standard material for snap rings. Hard drawn carbon steel has no scale as it receives its strength from the drawing process.[PDF]

HIGH TENSILE STEEL AISI 4140 - S&T Stainless

HIGH TENSILE STEEL – AISI 4140 AISI 4140 Chrome - Moly High Tensile Steel, generally supplied hardened and tempered to Condition “T” in sections up to 100mm, with a tensile strength of 850 – 1000 MPa and aiming for this strength range in larger sections. It offers a very good balance of strength, toughness and wear-resistance.

Spring Steel - Heat Treatable Spring Steel Strips ...

The austenitic stainless spring steel strips like 301 and 302 are temper rolled for light springs versus the martensitic spring steels, such as the 420 stainless strips, that are heat treatable for high hardness and toughness and are typically used for hardened tools.[PDF]

4140 High tensile - ssm.co.nz

and tempered condition. The Molybdenum additions prevent the steel from being susceptible to temper brittleness. Surface hardenable APPLICATIONS 4140 is the most commonly used of the high tensile steels with a wide range of applications in automotive, Gear …[PDF]

Effect of Yield-Tensile Ratio on Structural Behavior ...

an "unusually high" yield-tensile ratio, led to seismic code revisions. Regarding the effect of joint length on strength, the effect is similar for steels with different yield - tensile ratios. The yield-tensile ratio is a not a significant factor in determining the fatigue strength of fabricated members.

Tempered Stainless Steel | Mid America Stainless

Tempering is compressing flat stainless steel under very high pressure between two rolls to flatten and elongate it. Temper passing increases the material surface's tensile strength and yield strength.. We supply 200, 300 and 400 series stainless steel in all tempers from annealed to full hard.[PDF]

4130HW Alloy Steel - TimkenSteel | High-Performance …

TimkenSteel’s 4130HW steel is a fine-grained, low-alloy steel that offers optimum heat-treat response in heavier . cross-sections. It is used in a variety of bar and tubing applications in quenched/tempered conditions. Yield strengths range from 80 ksi through 95 ksi but may be tempered to …

High temperature steel - imoa.info

Molybdenum in solid solution reduces the creep rate of steel very effectively. It slows the coagulation and coarsening (Ostwald ripening) of carbides during high-temperature service. The best results in terms of elevated-temperature strength are obtained by quenching and tempering to produce a microstructure consisting of upper bainite.

Get In Touch24/7 Support

ADD : XICHENG SCIENCE & TECHNOLOGY BUILDING HIGH-TECH DEVELOPMENT ZONE, ZHENGZHOU, CHINA

TEL : 0086-371-86151827

FAX : 0086-371-86011881